Epoxy Paint Price

Product Code: 1431-1201 EPOXY PAINT TOP COAT

Epoxy Structure: Epoxy Resin

Epoxy Paint price excluding VAT: 245.00 TL / kg

What is epoxy paint?

Epoxy paint is a top coat paint based on epoxy resin, with a semi-matte appearance, highly resistant to chemical and physical effects.

Epoxy paint coating properties

Excellent resistance to chemical and physical effects, can be easily used on all kinds of metal and concrete surfaces.

Epoxy Paint Application Areas

Epoxy paint top coat can be easily applied as a top coat on all epoxy primer and intermediate coat systems applied to metal and concrete surfaces exposed to chemical substances like acid and base, as well as metal surfaces in port and industrial facilities.

Epoxy Primer Application
Surface Preparation:
Surface preparation for epoxy paint is as important as the application itself to achieve the desired success. Any moisture, chloride, sulfate salts, rust, mill scale on metal surfaces should be removed using grit blasting method to Sa 2 ½ grade according to Swedish Standard SIS 05 5900, or mechanically to St 2 standard. Additionally, dust, dirt, oil, and grease on metal surfaces should be cleaned with cleaning agents and/or high-pressure water jet. Welding spatters and sharp edges should be ground. After different cleaning processes, the surface should be cleaned with a vacuum cleaner, clean and dry air, or a clean brush. After these processes, there should be a slight metallic sheen on the surface, and the paint should preferably be applied immediately, but no later than 30 minutes after this process.

Paint Application:
Epoxy paint top coat (1431-1201) should be thoroughly mixed with a drill motor after opening the package, and then mixed with Epoxy Paint Hardener (1431-1501) in the specified ratio. Epoxy Thinner (1451-1401) should be added in the recommended ratio to bring the mixture to application viscosity. The mixture provides application viscosity. (For spray applications, the application viscosity should be adjusted to 19” - 22” / DC4 / 20°C, and for brush and roller applications, 25” - 40” / DC4 / 20°C.) To achieve the expected performance from the Epoxy paint top coat, it is recommended to apply it as a top coat with a dry film thickness of at least 50 - 60 µ on the recommended primers. If a wet-on-wet application is not to be done, wait 4 hours for intercoat adhesion before applying the second coat.

During Application

Air temperature should be between 5°C and 50°C,
The temperature of the surface to be applied should be between 10°C and 30°C,
Relative Humidity should be < 85%.

Important Reminders:

To avoid any health problems or fire hazards, ensure proper ventilation in enclosed spaces during application. If a wet-on-wet application is preferred, wait at least 45 minutes after applying the primer before applying the top coat, while paying attention to the product characteristics of the top coat. Prepare mixes in suitable quantities for the job and continue until the entire mix is used. After completing the application, thoroughly clean all painting equipment used during application with Epoxy Thinner 1451-1401. After application, the surface should not be exposed to water for at least 36 hours. Wait 7 days for full curing.

General Warnings

Use only in well-ventilated areas, with a mask, and do not inhale. The above product characteristics are based on the latest technology standards and laboratory test results, and are for guidance purposes. The conditions described for product use must be considered along with prevailing local conditions and other materials to be used. To achieve the best results, appropriate devices and application characteristics should be considered. The information in this document is valid until the next edition. The right to change the information without prior notice is reserved. Changes in the document (current version) will be published on en.lme.com.tr.